Sample
Name
JSC Mars-1 mixed with 10 wt% Water ice particles (4.5±2.5 μm)
Database
Experimentalists
Date
2017-04-04
Sample inside the thermal vacuum chamber during the measurement.
Physical characteristics
Thickness
10.0 $\pm$ 1.0 $mm$
Diameter
20.0 $mm$
Substrate material
aluminum sample holder covered with a black aluminum tape
Temperature
90.0 $\pm$ 2.0 $K$
Type
vacuum
Fluid pressure
20.0 $mbar$
Number
1
Layers
Title
Mixture of JSC Mars 1 powder with water ice particles

Precursors

Matters

Produced sample

Sample
JSC Mars-1 mixed with 10 wt% Water ice particles (4.5±2.5 μm) (this sample)
Processing steps
Step Chronology Date Type Process Changes
#1 before layer formation mixing The ice particles and the mineral powder are blended together with the help of a vortex mixer while they are repeatedly plunged into liquid nitrogen to avoid the sublimation and metamorphism of ice during the process. Ice and dust particles are mixed at the particles scale.
#2 during layer formation layer formation Because porosity influences the reflectance of the samples, we filled the sample holders without compressing the samples: the sample holders are first overfilled and then the excess is removed with a spatula. In this way, we obtain non-compacted samples with flat surfaces. We obtain a non-compacted sample with a flat surface.